Why does your Galaxy restart several times during a firmware update?
You tap install on a software update, the phone restarts, the Samsung logo appears, and then it restarts again. Sometimes it restarts a third time before you ever see your home screen. If you have never watched an update closely, that can feel like something is going wrong. In most cases it is not. The restarts are how Android installs an update, and each one has a job to do.
The restarts are part of the update, not a problem
A firmware update does not change your phone in one step. It replaces system files while the phone is running, then it needs a clean start so the new files can load instead of the old ones. That first restart is the phone switching over to the new version.
The second restart usually happens because the phone needs to finish setting up after the new version loads. The system checks that the new files are in place, rebuilds small pieces of data that changed between versions, and then restarts once more so everything starts from a known good state. None of that means the update failed. It means the update is following the normal sequence.
Most Galaxy phones restart two or three times during a full firmware update. A small security patch may only restart once. A large update that moves the phone to a new version of One UI is more likely to restart twice or three times. The number of restarts depends on the size of the update and on how much changed underneath.
What the first restart does
The first restart happens right after the download finishes and the phone verifies the update package. The phone checks the file is complete and signed by Samsung, and then it reboots into a special install mode. In this mode the phone is not running your normal system. It is running a small recovery environment whose only job is to write the new files to the system partition.
This is also the stage where you see the progress bar or the gear icon on a dark screen. The phone is writing the update, file by file, and it cannot be interrupted safely at this point. If the phone loses power here, it may need to be recovered with a computer, which is why Samsung warns you to keep the battery charged before you start.
Once the files are written, the phone restarts again to boot into the new system for the first time. That boot is slower than normal, because the phone is starting with new system files it has never run before.
Why the phone restarts a second time
After the first boot into the new version, the phone still has work to do. Apps need to be prepared for the new system, and the phone often rebuilds its app cache so your apps open correctly under the new version. On older Galaxy phones this step is visible: you see a message saying apps are being optimised, one by one.
That optimisation step is one of the main reasons for a second restart. The phone prepares the apps, then restarts so the optimised versions are the ones that actually load. Newer Galaxy phones do this work in the background and hide it better, but the extra restart can still happen.
There is another reason too. Some updates install in two parts. The first part updates the main system, and the second part updates the modem or the bootloader, which are separate pieces of software that run underneath Android. Changing those pieces needs its own restart, because they load before Android itself starts.
When repeated restarts mean something is wrong
Normal restarts happen a set number of times and then stop. The phone shows the Samsung logo, works through the update, and eventually reaches your lock screen. If the phone restarts over and over without ever reaching the lock screen, that is a boot loop, and it is a different problem.
A boot loop after an update usually means something went wrong during the install. The most common causes are a corrupted download, a battery that died mid-install, or an update package that did not match the phone. In that case the phone keeps trying to start, fails, and tries again.
If your phone has restarted more than five or six times and never shows the lock screen, stop waiting and act. Let the battery charge for a while, then try starting the phone in recovery mode and wiping the cache partition. If that does not help, a clean flash of the matching stock firmware is the usual fix, and it is a job worth doing carefully with the right file for your exact model.
How to tell a normal update from a stuck one
The simplest check is time. A normal firmware update, including its restarts, usually finishes within twenty to forty minutes from the moment you tap install. A phone that is still restarting after an hour has almost certainly run into a problem.
Watch what the screen shows between restarts. A normal update shows progress: a percentage, a gear icon, or an optimising message that moves forward. A stuck phone shows the same logo each time with no progress in between, or it vibrates and restarts before anything appears at all.
If the update is progressing, the best thing you can do is leave the phone alone. Do not pull the battery, do not force a restart, and do not unplug it from the charger. Every restart during an update is the phone doing a piece of work that the next step depends on, and interrupting it is how a routine update turns into a repair job.
For official firmware downloads and step-by-step flashing guides, visit SamFware, where SamFware keeps the latest stock ROMs for every Galaxy model.
Top comments (0)