DEV Community

#cnc

Posts

đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.
How Many Shops Should You Quote? The Math Behind 2 vs 5

How Many Shops Should You Quote? The Math Behind 2 vs 5

Comments 1
4 min read
Thread Milling vs Tapping vs Rolling: What Actually Changes in the Quote

Thread Milling vs Tapping vs Rolling: What Actually Changes in the Quote

Comments
4 min read
Reading a CMM Report: What the Numbers Actually Tell You

Reading a CMM Report: What the Numbers Actually Tell You

Comments
4 min read
How to Turn a Photo into a 16-bit Depth Map and STL for 3D Printing, Laser Engraving, and CNC

How to Turn a Photo into a 16-bit Depth Map and STL for 3D Printing, Laser Engraving, and CNC

Comments
6 min read
Six Checks Before You Send a Drawing to a New Chinese Machine Shop

Six Checks Before You Send a Drawing to a New Chinese Machine Shop

Comments 1
4 min read
304 vs 316 vs 17-4 PH: what actually changes in a stainless quote

304 vs 316 vs 17-4 PH: what actually changes in a stainless quote

Comments 1
4 min read
Anodized Aluminum Parts: The Dimensions, the Color, and the Callout Nobody Writes

Anodized Aluminum Parts: The Dimensions, the Color, and the Callout Nobody Writes

Comments 1
6 min read
A 0.5 mm Wall Doesn't Move While You Cut It: Notes From Filming a 4-Axis Aluminum Job

A 0.5 mm Wall Doesn't Move While You Cut It: Notes From Filming a 4-Axis Aluminum Job

Comments
4 min read
What Your 40 / 1,000 / 10,000-Piece Order Actually Tests in a Chinese 5-Axis Shop

What Your 40 / 1,000 / 10,000-Piece Order Actually Tests in a Chinese 5-Axis Shop

Comments 1
3 min read
CNC Aluminum Parts: What Actually Changes Between 200 Pieces and 10,000

CNC Aluminum Parts: What Actually Changes Between 200 Pieces and 10,000

Comments 1
3 min read
Guide Bushings Explained: Why Swiss-Type Lathes Hold Tolerances on Long, Thin Parts

Guide Bushings Explained: Why Swiss-Type Lathes Hold Tolerances on Long, Thin Parts

Comments 1
5 min read
CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation

CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation

Comments
14 min read
Material Removal Rate (MRR) Explained: Why Faster Feed Doesn't Always Mean Higher Productivity

Material Removal Rate (MRR) Explained: Why Faster Feed Doesn't Always Mean Higher Productivity

Comments
14 min read
What paying a Chinese machine shop actually looks like

What paying a Chinese machine shop actually looks like

Comments 1
4 min read
CNC Feed Rate Explained: Why F1000 Doesn't Always Mean the Same Thing

CNC Feed Rate Explained: Why F1000 Doesn't Always Mean the Same Thing

Comments 1
12 min read
đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.